TSM Tool Pro Edition 2026.10.01-0257 With Loader Tested — Full Changelog, Review & Download
Exynos support has quietly been the missing piece in TSM Tool's Samsung module for a while — until this build. TSM Tool Pro Edition 2026.10.01-0257 (TurboServiceMobile V2026.10.01-0257) finally opens the door to Samsung's Exynos-powered tablets and phones through a new EUB+DL Mode, bringing Remove FRP and Repair Boot/Exit EUB to devices that most tools still can't touch at current bit levels.
If you've ever had to turn away a Galaxy Tab S6 Lite sitting on bit7 because nothing in your toolbox could reach it, this release is your green light. Below is the complete, verified changelog (build logged 2026/10/01 01:22:17, package published 03:25:45), a breakdown of what changed from the previous release, a real repair scenario, and everything you need before you hit that download button.
TSM Tool Pro 2026.10.01-0257 at a Glance
| Detail | Info |
| Tool Name | TSM Tool Pro Edition (TurboServiceMobile) |
| Version | 2026.10.01-0257 |
| Release Date | October 1, 2026 |
| Setup File | TSM Pro Edition Setup[*].7z |
| Setup Size | 33 MB |
| Headline Change | Exynos devices added via EUB + DL Mode |
| Chipset Coverage | Qualcomm, MediaTek, Unisoc, HiSilicon (Kirin) |
What's New in This Release
Exynos Devices Join the EUB+DL Club
The biggest upgrade in 2026.10.01-0257 is the addition of new Exynos devices handled through EUB+DL Mode. For those new to the term: EUB (Exynos USB Boot) is a deep, pre-bootloader mode on Exynos chipsets — a communication channel that stays alive even when the normal Android boot chain is broken or locked down. By pairing EUB with Samsung Download-mode routines, TSM can now perform two critical operations on these models:
- Remove FRP
- Repair Boot / Exit EUB
That second one matters more than people realize. Interrupted jobs and failed flashes often leave Exynos devices stranded in EUB with a black screen — and until now, recovering them meant juggling multiple tools.
Newly Supported Models and Firmware Targets
Three devices have been added with full EUB+DL support in this build:
| Model | Status | Required Firmware |
Galaxy Tab S6 Lite 2020 (SM-P610) — Bit 7 | ✅ Newly Added | P610XXS7FYD1 |
Galaxy Tab S6 Lite (SM-P615) — Bit 7 | ✅ Newly Added | P615XXSAFYD1 |
Galaxy M31 (SM-M315F) | ✅ Newly Added | M315FXXS4CWK5 |
Galaxy A51 Family — Firmware Targets Refreshed
A smaller but practical update: the Galaxy A51 lineup received refreshed firmware targets, which keeps the tool aligned with current security patches in the field:
| Model | Updated Firmware Target |
| SM-A515F (Galaxy A51 Global) | A515FXXU8HWI1 |
| SM-A515U (Galaxy A51 US) | A515USQSCFXA1 |
| SM-S515DL (Galaxy A51 TracFone) | S515DLUDSFFXA1 |
Repair Boot / Exit EUB — Now for Every EUB+DL Model
TSM also extended Repair Boot / Exit EUB across all models supported via EUB+DL. In plain terms: if a device ends up stuck in EUB mode mid-job, you no longer need a separate rescue procedure. One tool, one workflow, start to finish.
Key Features of TSM Tool Pro Edition
- Repair, Flash, Unlock & Utility Functions — one interface for the daily grind
- FRP & KG/MDM Removal — handle Google locks and enterprise/MDM locks across brands
- Exynos EUB+DL Mode — the new headline: FRP removal and boot repair on Exynos devices, including bit7 tablets
- Multi-Brand Support — not locked to a single manufacturer
- Qualcomm, MediaTek, Unisoc & HiSilicon (Kirin) chipset support — broad coverage under one license
- Refactored Interface & Cores — a Standard and Simple GUI that's genuinely easier to navigate, rebuilt for stability
- Safer, Simpler Workflow — designed for routine service-center work without the risky advanced operations you only need occasionally
- High Performance — fast detection, quick operations, minimal waiting
The Pro Edition is deliberately the streamlined build. It's aimed at technicians and service centers doing high-volume, standard jobs — the kind of work where speed and repeatability matter more than a hundred experimental modules you'll never open.
Version Comparison: 2026.10.01-0257 vs. Previous Release
Here's what actually changed between this build and earlier 2026 releases, based on the official changelog:
| Area | Earlier Builds | 2026.10.01-0257 |
| Exynos Coverage | Limited — Samsung operations focused on Qualcomm/MediaTek paths | New EUB + DL engine path for Exynos devices |
Tab S6 Lite (SM-P610 / SM-P615) | Unsupported at Bit 7 | Fully supported — FRP + Repair Boot via EUB + DL |
Galaxy M31 (SM-M315F) | No EUB + DL entry | Added with matched FW M315FXXS4CWK5 |
| Repair Boot / Exit EUB | Only earlier EUB-capable models | Extended to every model supported via EUB + DL |
| Galaxy A51 Family | Supported, older FW targets | Firmware targets refreshed across A515F / A515U / S515DL |
| GUI | Refactored cores + Standard/Simple GUI introduced | Carried over and stabilized in this release |
The short version: the architecture was already solid after the interface refactor — this update spends its energy on coverage, specifically the Exynos gap.
⚠️ The Golden Rule Before Any FRP Job
Both the Exynos additions and the A51 refresh carry the same note from the developer, and it deserves bold text:
Before performing the FRP operation, flash the firmware version mentioned for that model.
Why? FRP partition layouts and offsets shift between firmware builds. Flashing the exact listed version — say P610XXS7FYD1 for the SM-P610 — puts the device into a known, predictable state so the tool's FRP routine hits the right partition cleanly. Skip this step and you're gambling: the operation may fail, or in the worst case, leave you with a much longer afternoon than you planned.
From the Workbench: A Practical Scenario
The job: A 2020 Galaxy Tab S6 Lite (SM-P610) lands on your counter. It was school-issued, got factory-reset during an IT audit, and the Google account tied to it is long gone. It's sitting on bit7 — the newest security level — and two other tools have already thrown their hands up.
Why this build changes the outcome:
- Verify the model and bit level. Check via recovery/download mode or *#1234# on a bootable unit. Confirm SM-P610, bit7.
- Download the exact firmware — P610XXS7FYD1. Not the latest version you find, not "close enough." The listed build.
- Put the tablet into EUB mode following TSM's guided flow inside the tool.
- Flash the listed firmware through the DL side of the EUB+DL workflow.
- Run Remove FRP (EUB+DL) — with the device now on the matching firmware, the operation lands cleanly.
- Run Repair Boot / Exit EUB to pull the tablet back into a normal boot state.
- Reboot, walk the setup wizard, confirm the Google lock is gone.
Total hands-on time: minutes, not hours. Before this build, step 3 alone was the wall — there simply wasn't a supported EUB+DL path for these tablets. That's the practical difference this release makes.
File Information
| Detail | Info |
| You will be downloading | TSM-PRO EDITION |
| Version | 2026.10.01 |
| Setup Size | 33 MB |
| Release Date | 2026/10/01 03:25:45 |
| File Name | TSM Pro Edition Setup[*].7z |
| Loader | Included and tested |
Frequently Asked Questions (FAQ)
What does EUB+DL Mode mean in TSM Tool Pro?
EUB stands for Exynos USB Boot — a low-level mode on Exynos-powered Samsung devices that responds even when the main boot chain is broken or locked. TSM pairs it with Download-mode routines (DL) so it can remove FRP and repair boot on devices that won't start normally.
Why must I flash the listed firmware before removing FRP?
FRP structures differ between firmware builds. Flashing the exact version from the changelog (e.g., P610XXS7FYD1) puts the device in a known state so the tool targets the correct partition safely. Skipping it risks failed operations.
Which devices were added in version 2026.10.01-0257?
Galaxy Tab S6 Lite 2020 (SM-P610) bit7, Galaxy Tab S6 Lite (SM-P615) bit7, and Galaxy M31 (SM-M315F) — all via the new Exynos EUB+DL Mode — plus firmware refreshes for the Galaxy A51 family (SM-A515F, SM-A515U, SM-S515DL).
What's the difference between TSM Pro Edition and the standard edition?
The Pro Edition uses the refactored Standard and Simple GUI, built for daily routine work — FRP, KG/MDM, flashing, unlocking, boot repair — with a safer, more streamlined workflow suitable for standard service centers.
How big is the setup file, and is it easy to install?
The Pro Edition ships as TSM Pro Edition Setup[*].7z at roughly 33 MB. Extract, install, and launch — the loader is included and the package has been tested on this release.
Does TSM Tool support chipsets other than Exynos?
Yes. TSM covers Qualcomm, MediaTek, Unisoc, and HiSilicon (Kirin) devices for repair, flashing, unlocking, FRP removal, and KG/MDM removal — all from a single tool.
Download TSM Tool Pro 2026.10.01 Update
Always download from the official source and verify the package before installing. Use this tool only on devices you own or are authorized to service.
📺 Follow Daarvi.Tech on YouTube
Get the latest mobile servicing tools, firmware updates, GSM tutorials and useful tech guides. Subscribe to our YouTube channel for new updates.
▶ Subscribe on YouTube
0 Comments
"We’d love to hear from you.
Share your thoughts, questions, or technical insights below. Please keep the conversation relevant and respectful. We review all comments before publishing to ensure a quality experience for the DaarviSoft community. (Your email address will remain private.)"